Pentair Water Components Catalogue 2023

PENTAIR TLC RO MEMBRANES: HIGH REJECTION STABILITY EVEN AT HIGH INPUT TDS Whatever the amount of total dissolved solids from the inlet water, TLC membranes will always give optimal performances* . For more information about reverse osmosis membranes, refer to the brochure «Pentair residential RO membranes». * Results obtained from internal testings (more testing results are available upon request). Rejection: percentage of Total Dissolved Solids (TDS) removed from the inlet water. The higher the rejection is, the better themembrane performs. Recovery: quantity of filtered water produced compared with the quantity of water sent to the drain. The higher the recovery, the lower the rejection. Pentair TLC 75 membrane gives better results: the rejection remains stable between 98% and 96% even at 1000 ppm and 40% of recovery. Meanwhile, the one fromcompetition is lower (92 to 89%). Recovery Rejection Rejection rate : TLC 75 vs competition Testing conditions : 3.5 bar feed pressure and 1000 ppm of TDS 96.07 97.55 92.39 89.88 88 % 92 % 96 % 100 % Competition TLC-75 15 % 20 % 25 % 40 % PENTAIR EP CARBON BLOCKS: BEST LIFETIME AND CHLORINE REDUCTION Our EP series of blocks has the best lifetime compared to competition. The chlorine reduction remains stable, well below the maximum safe threshold of 1ppm, even after having filtered more than 112’000 liters of water*. * Results obtained from internal testings (more testing results are available upon request). Whereas all blocks from competition failed at 15 days of testing or before (competitor A failed after 8 hours of testing), the EP-10 was still performing after 20 days of testing. From the end user point of view, the cost of filtered water per m 3 with a Pentair EP10 cartridge will be 96% cheaper. Liters Quantity of chlorine after filtration (ppm Cl2) Chlorine Reduction: EP-10 vs competition Testing conditions : 10”, 5µm cartridges. 4 bar feed pressure - 2 ppm of Cl2 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 0 9’500 19’000 28’500 38’000 47’500 57’000 66’500 76’000 85’500 95’00’ 104’500 114’000 EP-10 Capacity: more than 112’400 L Competitor C Capacity: 110’947 L Competitor B Capacity: 51’576 L Competitor A Capacity: 2’813 L Data in excess of 1 ppm = capacity of the cartridge is reached and it needs to be replaced. PENTAIR POLYDEPTH SEDIMENT CARTRIDGES: BEST FILTRATION EFFICIENCY Our Polydepth series of sediment cartridges has the best filtration efficiency when compared to cartridges from competition*. * Results obtained from internal testings (more testing results are available upon request). Out of all tested cartridges, Pentair Polydepth is the only one that keeps its promise of effectively reducing particles bigger than 5µm, delivering a quality that is lasting and superior to standards. Competitor C, which despite being the most attractive in terms of price, never reaches these same standards. Micron Ranges (µm) Filtration efficiency: Polydepth vs competition Testing conditions : 10”, 5µm cartridges. Maintained flow rate of 3.8 lpm. Mix of fine test dust. 50 55 60 65 70 75 80 85 90 95 100 5-9.9 10-14.9 15-19.9 Competitor A Polydepth PD5-10 Competitor B Competitor C Data equal or higher than 85% = the cartridge is rated at 5µm and performs as it should. FIltration efficiency (%) Pentair Filtration PENTAIR FILTRATION | FILTRATION | 333